ROTA-ML flex 2+2
Flexible 4-jaw compensation chuck
Centrically compensating 4-jaw chuck with large compensation stroke.
Description
Advantages – Your benefits
- Sealed manual lathe chuck
For significantly longer maintenance intervals - Patented drive concept
Independent installation of the jaw pairs with subsequent centrically compensating workpiece clamping - Flexible clamping system
For clamping round, cubic, or geometrically bulky workpieces - Compensation mechanism
Enables centric clamping of any workpiece geometries - Optimized chuck heights and weights for the new ROTA-ML?flex?2+2 versions from ??500?mm
For a maximum additional payload of workpiece weight - High efficiency of the wedge bar system
Process-reliable clamping due to high clamping forces - Lubrication system with grease circulation
Ensures permanent grease supply for constant clamping forces - Visual clamping release
As an indicator for the range in which safe clamping can be ensured - All sides of the functional parts are hardened and ground
Ensures a long service life
Options and special information
- Extremely flexible 4-jaw manual lathe chuck
Clamping of round, cubic and geometrically unshaped parts – no problem for the ROTA-ML?flex?2+2. Thanks to the patented drive concept with coupled jaw pairs, any workpiece geometry can be clamped centrically and without overdetermination. The chucks are used in particular in storage solutions and on mill/turn machines, but can also be used on lathes. The chuck weights of the large chucks with ??500?mm or more have been reduced by up to 40% compared to the previous version, so that an even higher workpiece weight can be loaded.