Modules used as workpiece interface
??? ??
Clamping modules or compensation modules used as an interface to the workpiece. The clamping modules can be actuated pneumatically or manually. The compensation modules serve to compensate for fine height differences.
??
SCHUNK ??? ?? ??
- Compensation of height differences up to 11?mm
Customized adjustment to the respective clamping task - ??? ? ?? ??? ?? ? ???
0.005mm ??? ??? ?? ??? - ?? ?? ? ??? ??? ??
???? ?? ?? - ?? ??? ??
?? ?? ????? ?? ?? ?? ???? ?? ?? 15?kN?? - ???? ?? ??
?? ??? ?? ??? ?? ??? ??? ??? ?? 300% ???? ???? ????. - ?????(Form-fit), ????? ??(self-retained locking)
?? ?? ??? ??? ??? ?? ?? - ?? ?? ?????? ???
? ?? ?? ? ?? ?? ???
?? ? ?? ??
- WDP-5X-DSM 99-70
Pneumatically actuated direct clamping module with high pull-down forces. ???? ????? ? ????? ??? ??? ?? ??????. - WDP-5X-DSM 99-70-M
Manually actuated direct clamping module with a high pull-down force. The workpiece direct clamping takes place via a rotary movement of an actuating screw, is form-fit and self-locking. - WDP-5X-ASM 99-70-?36
Pneumatically actuated compensation module with a high holding force. The compensation module can freely compensate for height differences of up to 11?mm. ???? ????? ? ????? ??? ??? ?? ??????.