KSX-E IOL

5-axis clamping vise

Electrically driven 5-axis vise with continuously programmable clamping stroke for digitalized process monitoring.

5-axis accessibility thanks to high jaws
Allows the workpiece to be machined from five sides
Powerhouse with 40?kN clamping force per jaw
For vibration-proof clamping in a reliable process, even with minimal clamping surfaces
Perfectly suitable for automation
Thanks to the electromechanical drive and fully integrated sensor and actuator systems
Integrated sensor and actuator systems
No additional interfering contour
Control via IO-Link
For easy integration in commonly used fieldbus systems
Maximum process reliability
Thanks to various query options and transmission of error messages
Continuously programmable clamping force
Maximum flexibility in terms of workpiece size and workpiece material
Continuously programmable clamping stroke and jaw pre-positioning
Clamping ranges individually adaptable to the workpiece
Extendable clamping range
Enables clamping of various workpiece lengths
Spindle on top
Prohibits a rear up of the jaws
Wide range of applications
Suitable for rough and finished parts machining
Wide jaw program
Optimal adaptation to new clamping tasks

Digital process monitoring
The digitalization of clamping devices will also have an increasing impact on clamping devices over the coming years, as these offer clear advantages, especially when machining medium and relatively small lot sizes with automated parts handling and comprehensive process monitoring. The new electromechanically driven 5-axis vise KONTEC KSX-E?IOL has now been developed precisely for this purpose. Activated by 24?V?DC, the new vise can be used to program and continuously adjust the clamping force up to 40?kN per jaw. The large clamping range of up to 420?mm with jaw pre-positioning makes the KONTEC KSX-E?IOL a very flexible clamping device, especially in this field of application. All programmable parameters can also be transferred to the machine control and evaluated via the integrated IO-Link interface.
Optimum 5-sided accessibility
Due to its geometry with very high jaws, the vise ensures optimal accessibility for 5-sided complete machining on 5-axis machines. The top-mounted spindle ensures that the clamping force is applied directly below the workpiece, thus preventing the jaws from lifting up. The vise works reliably even under the influence of chips, dirt or coolant. Thanks to its complete sealing and metal housing, the electronics and actuators are also optimally protected. The extensive portfolio of system and top jaws from SCHUNK rounds off the overall package of the KONTEC KSX-E?IOL