KSX-E 125-430-CI IOL
ID 1601447
Product features:
- Without system jaws
- Control via IO-Link
- Continuously programmable clamping force
- Continuously programmable clamping stroke
- Jaw pre-positioning
- Pneumatic media transfer into the system jaw
- IO-Link interface: Fixed cable connection
- Dimensions: 125 x 520 x 150 mm
- Basic clamping stroke: 120 mm
- Clamping force: 6 - 40 kN
- Operating voltage control unit: 24 V DC
- Operating voltage actuator: 48 V DC
- Weight: 32 kg
Technical details
| Width of the clamping vise [mm] | 125.0 |
|---|---|
| Min. clamping force [kN] | 6.0 |
| Max. clamping force [kN] | 40.0 |
| Operating voltage control unit [V DC] | 24.0 |
| Operating voltage actuator [V DC] | 48.0 |
| Basic clamping stroke [mm] | 120.0 |
| Weight [kg] | 32.0 |
Scope of delivery
Vise, operating manual; without system jaws, without connection cable for integration into the machine control
Programmable clamping force
The clamping force can be continuously adjusted via the software in a range from 6?kN to 40?kN per chuck jaw.
Jaw pre-positioning and programmable clamping stroke
The jaws can be pre-positioned depending on the workpiece size so that the clamping stroke and clamping time can then be reduced to a minimum during automated loading processes.
Pneumatic media transfer into the system jaw
For workpiece contact control via dynamic pressure or cleaning of the clamping surfaces The system jaws must be prepared accordingly by the customer.
Clamping range
To cover the entire clamping range from 5 to 420?mm, the vise must be extended with the corresponding drawbar extension (see accessories).