Modules used as workpiece interface
Clamping modules
Clamping modules or compensation modules used as an interface to the workpiece. The clamping modules can be actuated pneumatically or manually. The compensation modules serve to compensate for fine height differences.
Description
Advantages – Your benefits
- Compensation of height differences up to 11?mm
Customized adjustment to the respective clamping task - Scope-free pin centering between components
High repeat accuracy of <?0.005?mm - Intelligent clamping connection between the stacking modules
For simple and quick operation - High pull-down forces
Up to 15?kN for high cutting parameters and greater production efficiency - Turbo integrated by default
Pull-down force increased up to 300% for optimal utilization of the machine's performance, hence high efficiency. - Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop - Corrosion-free stainless steel design
Long life time and maximum process reliability
Options and special information
- WDP-5X-DSM 99-70
Pneumatically actuated direct clamping module with high pull-down forces. The workpiece is clamped via spring force in a self-locking and form-fit fashion. - WDP-5X-DSM 99-70-M
Manually actuated direct clamping module with a high pull-down force. The workpiece direct clamping takes place via a rotary movement of an actuating screw, is form-fit and self-locking. - WDP-5X-ASM 99-70-?36
Pneumatically actuated compensation module with a high holding force. The compensation module can freely compensate for height differences of up to 11?mm. The workpiece is clamped via spring force in a self-locking and form-fit fashion.